Dr. Fixit Super Latex is based on acrylic 100% bounding agent supplied as a ready to use bonding agent in liquid consistency. It is reduces shrinkage, prevents cracking, prevents dust pick up and improves abrasion resistance. Dr. Fixit Super Latex is bonds strongly to old & new concrete and to plasters and used for repair of spalled concrete. Area of Application  Repair structural concrete, fixing or re-fixing of slip bricks, tiles, stones & marble bedding, waterproofing and as a bond coat
Method of Application 1 Surface Preparation  Clean the surface with wire brush or scrubber to remove hidden dirt, loose particles, laitance & dust. Degrease the surface by using suitable solvents.  Repair the concrete spalled portion by saw, cutting the extreme edges of the repair location to a depth of at least 10 mm to avoid featheredging & to provide strong substrate.  Clean the concrete surface to remove any contamination where breaking is not possible. Roughen the surface by light scrabbling or grit blasting.  Expose corroded rebar in the repairing area fully. Remove all loose scales & corrosion deposits and immediately clean the surface. 2. Priming  For priming of steel surface, apply one coat of Dr. Fixit Super Latex to all exposed reinforcement area &allow it to dry before second coat application.  For priming of concrete substrate, the surface should be thoroughly saturated with potable water. Remove any excess of water prior to application ratio. Slowly mix cement with binder to obtain a smooth consistency. Continue mixing the slurry during application to prevent settlement. ** For bond coat application  Apply Dr. Fixit Super Latex to prepare substrate by brush at rate 4-5 m2 per ltr.  After applied wait until Dr. Fixit Super Latex form tacky, then applied other cementitious application. 3. Mixing  A forced action mixer is essential (PAN Mixer) & recommended to ensure that Dr. Fixit Super Latex mortar is thoroughly mixed. Use a suitable sized drum with heavy-duty electrical drill machine fitted with spiral paddle mixer at slow speed of 400-500 rpm.  Hand mixing is permissible only for 25 kg or less quantity